This is an old revision of the document!
Bachin Arduino Nano Flash Tool
If you buy a new pcs Arduino Mega32p Nano Module for your laser/cnc/drawing machine control board.
You must flash a Firmware matching the machine into it.
It's easy to do.
STEP 1:
download a software toolkit
STEP 2:
Download a firmware file with .hex suffix. Please select the right firmware matching your machine. If you flashed a wrong firmware, the machine will not work, or very strange. Don't worry, to correct the problem, just flash the correct firmware.
STEP 3:
Connect the Nano Module with a USB cable.
STEP 4:
Run Flash.exe, click the only button, select the firmware file.