Differences

This shows you the differences between two versions of the page.

--- bachin_d8-4050p [2018/09/27 10:17]
ljx
+++ bachin_d8-4050p [2021/02/23 09:50] (current)
ljx
@@ Line 5: / Line 5: @@
 This is the user guide for the Bachin D8-4050P laser engraving machines. This guide is here to help you get started. There is a lot here–covering how you set up and use the machine, and pointing you towards additional resources for the future.
-**1.software >> Engraver Master**
+**1.Software >> Engraver Master**
   download from ：http://www.bachinmaker.com/update/litefire/setup.exe
-**2.assembly video on YouTube** :https://www.youtube.com/watch?v=jzn5mif5Ldo&feature=youtu.be
+**2.Assembly video on YouTube** :https://www.youtube.com/watch?v=jzn5mif5Ldo&feature=youtu.be
-some assembly details (picture):http://bachinmaker.com/wiki/doku.php?id=laser_machine_assembly_instruction
+More assembly details (picture):http://bachinmaker.com/wiki/doku.php?id=laser_machine_assembly_instruction
 or just watch the video from here:
 {{youtube>jzn5mif5Ldo?medium}}
-. **Installing Engraver Master:**you can find the setup.exe from the USB flash driver or download from the wiki.
+**3.Connected all the cables--**follow the picture:
+{{:img_3233.png?600|}}
+**4.** **Installing Engraver Master:**you can find the setup.exe from the USB flash driver or download from the wiki.
 After download the driver :**setup.exe** ,run this file then here comes an icon on the computer desktop .
+{{:qq图片20171023150935副本.jpg?100|}}
+the interface:
+{{:001.png?600|}}
+**5.Engraver Master anatomy:**
+See the top menu of the interface ,there have :Print Picture,NC Sender,Quick Tagging and Device Settings.
+//**Print Picture--**// Suitable for gray style , and it's very slowly , so if you really need to engraving a gray style picture,we suggest you'e better use another software which more faster then this one .Here>>http://www.bachinmaker.com/update/laserprint/setup.exe
+//**NC Sender**//--Automatically generate path files without trans-coding, fast speed and good effect.Recommended！Prefer this engraving mode.
+{{:02副本.jpg?600|}}
+//**Quick Tagging**//-here is for engraving the single line font .
+//**Device Settings**//--setting the speed,laser powder ,machine type and so on.
+Don't forget click on Save Settings when change any settings.
+{{:002.png?600|}}
+Now , it is ready to start the first engraving .
+Please pay attention to protect your eyes and use protective glasses.
+You should cut of the power when not use the machine .
+Sometimes ,the software maybe disconnected ,don't worry ,Turn off and restart,or delete it and reinstalling again.
+Can not use benbox software.
+Supported the system:windows XP ,windows 7/8/10. Can not supported MAC.
+**6.if you feel that the feet of the machine are not level, you can put a sponge paper or other thin object on the foot of the machine.
+**
+see the follow picture:
+{{:img_3495.jpg?600|}}
+Links:
+  * [[carve_photos_at_fastest_speed|Carve photos at fastest speed]]
+  * [[solve_laser_problems|How to solve the Laser Problems]]
+  * [[solve_motor_problem|How to solve the Motor Problems]]
+  * [[d8_4050_1720_laser_assembly_problem|D8-4050P Assembly problems]]
+  * [[software_interface_problem|Windows7 Display Problem]]
+  * [[install_end_stop_switch_laser_machine|Install End Stop Switch for Laser Machine]]
+  * [[buy_new_belts|Buy new belts]]
+  * [[avoid_white_lines|How to avoid white lines]]
+  * [[update_firmware|How to Update Firmware on Board]]
+  * User [[light_burn|Light Burn]] application.
+  * [[4050_stop_half_the_project|4050 Laser stop half the project]]