Bachin laser engraving machine D8-1720 » Relevant information

**0.Preliminaries**

 Welcome to Bachinmaker! This is the user guide for the Bachin D8-4050P laser engraving machines. This guide is here to help you get started. There is a lot here–covering how you set up and use the machine, and pointing you towards additional resources for the future.

**1.Software »**

 [[engraver_master|Engraver Master]] 

download from ：http://www.bachinmaker.com/update/litefire/setup.exe

**2.User Guide** 

video on YouTube :https://www.youtube.com/watch?v=BeeOugWwkeU

or just watch the video from here:
{{youtube>BeeOugWwkeU?large}}

**3.Connected all the cables–**follow the picture:

{{:img_3233.png?600|}}

**4. Installing Engraver Master:**
you can find the** setup.exe** from the USB flash driver or download from the wiki.

After download the driver :**setup.exe** ,run this file then here comes an icon on the computer desktop .

{{:qq图片20171023150935副本.jpg?100|}}

the interface:
{{:001.png?600|}}

**5.Engraver Master anatomy:**

See the top menu of the interface ,there have :**Print Picture,NC Sender,Quick Tagging and Device Settings.**

//**Print Picture–**// Suitable for gray style , and it's very slowly , so if you really need to engraving a gray style picture,we suggest you'e better use another software which more faster then this one .Here»http://www.bachinmaker.com/update/laserprint/setup.exe

//**NC Sender–**//Automatically generate path files without trans-coding, fast speed and good effect.Recommended！Prefer this engraving mode. 
{{:02副本.jpg?600|}}

//**Quick Tagging-**//here is for engraving the single line font .

//**Device Settings–**//setting the speed,laser powder ,machine type and so on. Don't forget click on Save Settings when change any settings. 
{{:002.png?600|}}

Now , it is ready to start the first engraving . Please pay attention to protect your eyes and use protective glasses.

You should cut of the power when not use the machine .

Sometimes ,the software maybe disconnected ,don't worry ,Turn off and restart,or delete it and reinstalling again.

Can not use benbox software.

Links:

  * [[wood_cutting|Example Project: Wood Cutting]]
  * [[carve_photos_at_fastest_speed|Carve photos at fastest speed]]
  * [[solve_laser_problems|How to solve the Laser Problems]]
  * [[solve_motor_problem|How to solve the Motor Problems]]
  * [[fix_wrong_printed_size_xy_steps_parameter|Fix Wrong Printed Size]]
  * [[upgrade_laser_module|Upgrade Laser Module]]
  * [[software_interface_problem|Windows7 Display Problem]]
  * [[install_end_stop_switch_laser_machine|Install End Stop Switch for Laser Machine]]
  * [[not_enough_belt|Not Enough Belt]]
  * [[avoid_white_lines|How to avoid white lines]]
  * [[update_firmware|How to Update Firmware on Board]]
  * [[lose_position|Lose Position]]
  * [[machine_not_communicating_computer|Machine not communicating with computer]]
  * [[bachin_arduino_nano_flash_tool|Flash Firmware]]
  * [[light_burn|Light Burn]]